Large Aluminum 24V - 120VAC Electric Winch
|
Large Short Frame Aluminum 12V Electric Winch |
Large Aerostat Aluminum 24 VDC or 120VAC Winch
for long tethers, rope, line or cable.
Large Balloon Aluminum Winch with Electric Motor
The Large Aluminum Winch comes equipped with a 1 HP 24v or 120 VAC
Motor and Motor Brake, with a rating of 1800 RPM, 180 inch lbs. of torque
geared through a 60 to 1 gear box. Torque is then applied to the spool shaft through a
flexible coupling to minimize bearing failure. Amperage draw running light is
approximately 9 amps DC. Under normal working conditions, the amperage draw is approximately
50 amps DC. As the case with any DC Motor, amperage increases and the RPM’s decrease
with heavier loads. Maximum Line pull with empty spool is 900 pounds. Line Pull Speed is 57 Ft Per Minute. The Large Aluminum Winch comes with Electrical Slip Ring (6 signal circuit), a Variable Speed Level Wind, Stainless Steel
Roller as standard equipment. Also, included
is 1 #2X442 Drum switch that allows you to turn the reel in forward or reverse.
ITEM NUMBER
Large 1W 24V
|
................................
|
ITEM NUMBER
Large 1W 120VAC
|
Large MINI Aluminum 24 VDC or 120VAC Winch
for shorter tethers, rope, line or cable..
Large Aerostat Aluminum Winch with Electric Motor
The Large Balloon Aluminum Winch comes equipped with a 1 HP 24v 0r 120VAC
Motor and Motor Brake, with a rating of 1800 RPM, 180 inch lbs. of torque
geared through a 60 to 1 gear box. Torque is then applied to the spool shaft through a
flexible coupling to minimize bearing failure. Amperage draw running light is
approximately 9 amps DC. Under normal working conditions, the amperage draw is approximately
50 amps DC. As the case with any DC Motor, amperage increases and the RPM’s decrease
with heavier loads. Maximum line pull with empty spool is 800 pounds. The Large Aluminum Winch comes with Electrical Slip Ring (6 signal circuit), a Variable Speed Level Wind, Stainless Steel
Roller as standard equipment. Also, included
is 1 #2X442 Drum switch that allows you to turn the reel in forward or reverse.
ITEM NUMBER
Large 2W 24V
|
................................
|
ITEM NUMBER
Large 2W 120VACL
|
|
| SPECIFICATIONS
(for Large Electric Model) 1W |
1/4" Tether Cable |
Approx. 1.5 miles |
5/16" Tether Line |
Approx. 1 mile |
Length x Width x
Height |
38" x 20" x
21 1/2" |
Mounting Base |
29 1/2" x
18" |
Weight |
138 lbs. |
|
| SPECIFICATIONS
(for Mini Electric Model) 2W |
1/4" Tether Cable |
Approx. 2000 Feet |
5/16" Tether Line |
Approx. 1300 Feet |
Length x Width x
Height |
38" x 14" x
15" |
Mounting Base |
29 1/2" x
13" |
Weight |
91 lbs. |
OPTIONS
REPLACEMENT
DRUM SWITCH |
ITEM
: Large 1WS |
|
Variable Speed Level Winder
|
ITEM
: VLW
|
|
Dual Motor Drive with Brake
|
ITEM
: DMD 12/24/120
|
|
9 Inch Drum
|
ITEM
: DS9
|
|
Electrical Slip Ring 6 Signal Circuits - 9 Inch Drum Required, Fiber Optic Available.
|
ITEM
: ESR6
|
|
Sand Shield on Level Winder
|
ITEM
: SLW
|
|
Charlie Steffen
Systems Director
Phone: 503 396 8417
Fax: 888 697 1734
Mobile: 503 396 8417
7 AM - 5 PM - PST
charlie@skydocballoon.com
Copyright © 2016 Skydoc Systems, INC. All Rights Reserved. * Patented Components
All materials contained in www.skydocballoon.com are protected by copyright and trademark and shall not be used for any purpose other than private, non-commercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.
Made in the USA